Thursday, 5 December 2013

Fringe Furniture of 2013

So this is becoming a annual occurrence in that I try my best to get good pictures of all the pieces that are on show at the exhibition.  

I am Still in the process of putting the Artist + Designers names to the products. So if you notice that your piece isn't up or I have made a spelling mistake please let me know.

I just want to state that these pictures I took are to promote Australian Design. I believe that design and manufacturing have a lot to offer. With the amount of creativity being released into the public scene its overwhelming to try and capture each piece!

This years Fringe Furniture featured nearly 100 pieces of furniture, lighting and objects!






FINN - Christopher Herman

Resonance - Ky Snyder

Play Cube - Greg Lawson


Cast Metropolis - Sam Johnston

Ooti Shelving Unit - Malcom Thomas

The Cork Connection Stool -  Asher Abergel

Crated - Tim Knott

PH-05 - Dimitrios Tsiokaras

Toku Bed - Sean Kellet

Add caption

Limbo Table - Guy Turnbull

Escalating - Anthony Trott

Spindet - Nick Sadowsky

Pallet to Pallet - Marcus O'Reilly

Add caption

Leaf Skeleton - Chris Vassallo

Add caption

Out of the Boxy - Ka Ho (Joe) Li

Vault Coffee - Sam Johnston

Curly Wurly - Emma Mitchell

Forest -  Emma Mitchell

Bucket - Emma Mitchell

James Hargraves

Tri-ble - Dusko Lapcevic

Rock-a-saurus - Adam Giannikos

The Festering - Amanda Gibson

Jack Light - Donna Kirkwood

Eggos - Gavin Bufton

Add caption

Collate - James Claridge

Collate - James Claridge

Stretch Desk - Ashley Allen

Hyperbolic Chair - Adam Markowitz

Temari - Jess Lenton

Threaded Out Chair - Rowan Turnham

Side Table - Adam Markowitz

Equivocal Equilateral - Toby Horrocks

 This is not a Jimmy Possum chair - Michael Epworth

Funnel Draw - Anna Miller-Yeaman

Flashlight Pendant - Hugh Altschwager

Drape OC - Sam Johnston

ShimB & ShimA framed - Karl Baxter

Fledgling - Alex Sanson

Möbius Chair - Adam Markowitz

Refractable - Dion Baines

The Teepee Kids - Tom Gaunt

Cube Stool/Table - Patrick McEldowney

The Czech Hedgehog - Nico Evans

Candy Bench - Celine Huggins

Infinity - Hayden Kinghorn

Coat Hanger - Justin Mosedale

Kav pendant light Italic & Bold - Asher Abergel

Pull Legs - Rory Davenport

Add caption

Butterfly'd - Anthony Trott

Pulp Floor Lamp - Craig Frankland

Arbol Shelf - Alex Brown

Rock On - Adam Brislin

Add caption

Light Sculptures - Claire Tracey

Isosceles - Peter Schembri

T-Stool - Lisa Oten

The Otway Buoy Pendant - Tom Gaunt

TROiKA - Alex O'Connell

"Empire Skin" Platform Table - Michael Brierly

Un-Hinged Stool - Nick Sadowsky

Shadow Chair - Dusko Lapcevic

Dollop Light - Andre Hnatojko

Add caption

Charpill Candela - Alexandra Arias

I feel like I'm made of gold and my brain is a pot of honey - Roslyn Campbell

Zen - Sean Tan

The Two Chairs - Suzanne Nguyen

Eagle - Hayden Kinghorn

(S)Poked - Damian Cuffe

Texture II (2013) - Kenton Rogers

Hertzian Chair - Luke Batten

Add caption

S-light light - Alex Lesniowski

Add caption

Pneumatophore 2 - Guy Drew Parker

A Trio of Poufs - Gaye Naismith

Add caption

Cracked Log Lamp - Duncan Meerding

Add caption

Cráneo - Kevin Nguyen

Realax Range Bench - Tim Collins

Light Symphony - Eugene Lachowicz

J.A.F.A. - Monique Stevens

J.A.F.A. - Monique Stevens




Sunday, 24 November 2013

Designing a safe electric Kettle

The brief for this group project was to create a kettle that responded to the ever increasing burns and scalds that are becoming ever to common with the very young and old persons.  Below are extracts from the design brief that we were given for the project. And give a detailed outline of what is expected in the final design and how the designers (us) should address the problem.


The Monash Injury Research Institute is an umbrella organization for a range of
associated research groups that cover transport, workplaces, homes, sport, etc.
Within the group that addresses home and sports safety is the Victorian Injury
Surveillance Unit (VISU) which publishes Hazard, a bi-annual journal which examines
injuries due to hazards in everyday life.


Reference: Hazard no. 57 Unintentional burns and scalds in vulnerable populations:
the very young and the very old, Victoria July 2001 to June 2003. These injuries are
common and although they occur through a range of causes, the problem age
groups are at both ends of the life spectrum.


Electric kettles are only one source of hazard and although they are not a major
agency for burns and scalds, they are still an inherently hazardous product and a
designer would not want to overlook the potential for these hazards if ever they were
to design a portable, electric, boiling water appliance.



What should be the design for a kettle for people who, across the population of the
very elderly can be generalized as having…?


- limited grip and arm strength
- poor co-ordination
- limited fine motor movements
- unsteady limbs and poor
- accuracy in targeting

- poor vision
- slow reactions
- reduced sensory response
- poor hearing
- lapses of attention and memory
- erratic and inconsistent decision
making processes




Below is some pages from the folio for the design. Enjoy!























This was a design by Kirby Masterman, Aileen Ng & Rowan Turnham.
Monash Industrial Design 2013.

Monday, 18 November 2013

Plastic Extruder - 3D print

For our studio class we had to make an plastic extruder from off the shelf parts and materials. The aim of the class project was to make a extruder that is cheap to manufacture with simple tools and machines that people can access in one way or another.

With one class making 3D printers and the other coding the software for Rhino. These studios were very interesting. I wish I saw more of the other classes work though.

The idea that a person can walk down their own street. And pick up plastic bottles (something that is sadly prevalent in all suburbia and cities) and shred the thermo-plastic. Any plastic bottle that has a recycle symbol with the numbers 1-7 will do. And then feed it through the extruder producing a filament which is dictated by the die head on the end of the tube. Its just amazing to think that methods like these are now easily available to just about anyone.

I also just want to state that this design is not ours. It was a project by our teacher Robert Eales, he did it for his PHD research project.  And he was just allowing us to make it for our class.






Porcelain heat plates for the extruder!



Spinning the die........for the 2nd time!

Had to mill out a pocket to allow the heat plate to set flat

Assembly of the extruder in workshop



Aluminium Filament Die to the left, Brass Nut to the Right.

Die head is spun Aluminium, 2.5mm filament hole, inset Brass threaded nut.

This is Engineering guys extruder!

They got theirs hooked up to the electronics

In the end it did push through some fragmented Filament


Final product!


We didn't actually get to see the extruder we made in action. But hopefully it does get used in the studio at uni. Big shout out to Taylor Zhou, Caitlin Wood, Aileen Ng and Jon Wee! Good work guys!

Wednesday, 13 November 2013

Maya - Objects in Space Project

So its been a very testing semester at university, but I managed to pull through. As I haven't done any posts in a while I thought I would share with you my 3D modelling project. 

The aim of the brief was to create a scene which we had to construct in real life with real objects. In doing this we can study how light reflects and reacts with certain materials. And also study the forms and shapes that make up each object.

Below is the final renders for the project. And then following are some pictures from the photo shoot that I did initially to get an idea for the scene. Enjoy!







After countless hours using Maya, I am going to say its a very good program. But at the same time I feel it has so many settings and adjustments that it just takes forever to get something right. 




Now that you can see the real deal. You can easily tell the difference. There are aspects of the scene that aren't perfect but I am pretty happy with what I produced.